Show menu

Laboratory

At FRAGMAT S we produce quality construction products, both for thermal insulation based on expanded polystyrene (EPS) and waterproofing based on bitumen. This is achieved by constantly testing the quality of our products and improving our product features.

For this purpose, within our company, there is a control laboratory in which we monitor the quality level on a daily basis, and is also in the function of developmental research. Validity - correctness of control procedures is under constant supervision of the external control institution ZAG Ljubljana. Quality of products is controlled by the following institutions: INSTITUT IMS d.o.o. Belgrade and INSTITUT ZA PUTEVE d.o.o. Belgrade.

Determination of flexural strength of DRVOLIT and KOMBI boards and EPS boards in accordance with EN 12089.
Determination of flexural strength of DRVOLIT and KOMBI boards and EPS boards in accordance with EN 12089.
Determination of tensile strength of DRVOLIT and KOMBI boards and EPS boards by measuring maximum tensile force in accordance with EN 1607.
Determination of tensile strength of DRVOLIT and KOMBI boards and EPS boards by measuring maximum tensile force in accordance with EN 1607.
Determination of compressive strength of DRVOLIT and KOMBI and EPS boards (at 10% deformation) according to EN 826.
Determination of compressive strength of DRVOLIT and KOMBI and EPS boards (at 10% deformation) according to EN 826.
Flammability check in a low flame combustion chamber according to DIN4102 and EN ISO 11925-2.
Flammability check in a low flame combustion chamber according to DIN4102 and EN ISO 11925-2.
Thermal conductivity measurements (W m-1 K-1) according to EN 12667.
Thermal conductivity measurements (W m-1 K-1) according to EN 12667.
Organic matter content according to EN 13820.
Organic matter content according to EN 13820.
Measurement of dynamic stiffness s’ (MN/m3) which is used to determine the values of the impact sound level Ln, w, R (dB).
Measurement of dynamic stiffness s’ (MN/m3) which is used to determine the values of the impact sound level Ln, w, R (dB).
Determination of the adhesion of granules (scaling slate) on bituminous mass by brushing, in accordance with EN 12039.
Determination of the adhesion of granules (scaling slate) on bituminous mass by brushing, in accordance with EN 12039.
Determination of breaking force of waterproofing bituminous sheets by stretching the test specimen until breakage, in accordance with EN 12311-1.
Determination of breaking force of waterproofing bituminous sheets by stretching the test specimen until breakage, in accordance with EN 12311-1.
Determination of the flexibility of waterproofing strips at low temperatures by automatic measurement during immersion in cooled media, in accordance with EN 1109.
Determination of the flexibility of waterproofing strips at low temperatures by automatic measurement during immersion in cooled media, in accordance with EN 1109.
Determination of watertightness of waterproofing strips in accordance with EN 1928: 2000.
Determination of watertightness of waterproofing strips in accordance with EN 1928: 2000.
Determination of softening point of bitumen and bituminous compounds by ring and ball method, automatic device, in accordance with EN 1427.
Determination of softening point of bitumen and bituminous compounds by ring and ball method, automatic device, in accordance with EN 1427.
Determination of viscosity of bituminous emulsions by the efflux viscometer - Leakage time; EN 12846-1.
Determination of viscosity of bituminous emulsions by the efflux viscometer - Leakage time; EN 12846-1.
YOUR PARTNER
The brand FRAGMAT, a concept of quality and tradition.
More information
TRADITION
By developing new programs and new technologies we have built up a successful brand.
More information
QUALITY
We operate in accordance with the guidelines of an established and certified management system.
More information
ENVIRONMENT
We are focused on managing our regular requirements and reducing our environmental impact.
More information