AN-55 EMULSION
Anionic unstable emulsion AN 55 is used for spraying a substrate of limestone origin and as a bonding layer between asphalt layers in the construction of road surface.

The product is applied by spraying. The product complies with SRPS...
More about product
KN-55 EMULSION
Cationic unstable emulsion KN 55 is used for spraying the substrate and as a bonding layer between the asphalt layers in the construction of road surface. The product is applied by spraying.

The product complies with SRPS U.M3.024 and...
More about product
KP-60 EMULSION
Cationic unstable emulsion KN 60 is used for spraying the substrate and as a bonding layer between the asphalt layers in the construction of road surface. The product is applied by spraying.

The product complies with SRPS U.M3.024 and...
More about product
KP-55 EMULSION
Cationic semi-stable emulsion KP 55 is used for spraying the substrate and as a bonding layer between asphalt layers in the construction of road surface. The product is applied by spraying.

The product complies with SRPS U.M3.024 and...
More about product
WINTER EMULSION ZKP-60
Cationic semi-stable emulsion ZKP 60 for winter conditions, used for spraying the substrate and as a bonding layer between asphalt layers in the construction of roads surfaces. The product is applied by spraying. Due to its special properties and...
More about product
KS-50 EMULSION
Cationic stable emulsion KS 50 is used for recycling old asphalt, stabilizing the substrate, making bitumen sludge (slurry seal) and cold sealed asphalt. The product is applied by spraying. The product complies with SRPS U.M3.024 and SRPS EN 13808
More about product
EMULSION PmB KN-50
Polymerbitumen cationic unstable emulsions PmB KN 50 are used for spraying the substrate and as a bonding layer between asphalt layers in the construction of highways and roads with very heavy load, where polymer bitumen is used as the binder. The...
More about product
EMULSION PmB KN-60
Polymerbitumen cationic unstable emulsions PmB KN 50 are used for spraying the substrate and as a bonding layer between asphalt layers in the construction of highways and roads with very heavy load, where polymer bitumen is used as the binder. The...
More about product
BITULIT M
BITULIT M is used as a cold bituminous primer for the installation of single-layer and double-layer waterproofing in road construction (on concrete or steel bridge structures). Applied by roller, brush or spray on a clean, dry and dedusted surface....
More about product
MZB COMPOUND
MZB bituminous compound is a homogeneous mixture of oxidized bitumen and various types of fillers, which is used for sealing of joints on stone and concrete pavements. It is applied in a warm process and must be melted before use.
More about product
PBM for joints
PBM for joints is a homogeneous mixture of SBS-modified bitumen and filler, used to seal connecting points, cracks and joints on pavements. It is applied in a warm process and must be melted before use. The product complies with SRPS U.M3.095.
More about product
PBM for waterproofing
PBM for waterproofin is a homogeneous mixture of SBS-modified bitumen and filler used for hot execution of waterproofing in underground and above-ground waterproofing systems in combination with bituminous sheets. The compound consumption is about 2...
More about product
IZOTEKT P4 M
Waterproofing bituminous sheet IZOTEKT P4 M is used in systems of waterproofing of concrete and steel bridge structures. It is installed by welding, with an overlap of 10 cm, on a previously prepared substrate coated with Bitulit M or by bonding...
More about product
IZOTEKT P5 M
Waterproofing bituminous sheet IZOTEKT P5 M is used in systems of waterproofing of concrete and steel bridge structures. It is installed by welding, with an overlap of 10 cm, on a previously prepared substrate coated with Bitulit M or by bonding...
More about product
IZOELAST P4 M
Waterproofing bitumenous sheet IZOELAST P4 M is used in waterproofing systems of concrete and steel bridge structures. It is installed by welding, with an overlap of 10 cm, on a previously prepared substrate coated with Bitulit M or by bonding it...
More about product
IZOELAST P5 M
Waterproofing bitumenous sheet IZOELAST P5 M is used in waterproofing systems of concrete and steel bridge structures. It is installed by welding, with an overlap of 10 cm, on a previously prepared substrate coated with Bitulit M or by bonding it...
More about product
YOUR PARTNER
FRAGMAT brand, a concept of quality and tradition.
More information
TRADITION
By constantly keeping up and adopting new technologies, we have earned ourselves an image of successful brand.
More information
QUALITY
We operate in accordance with the guidelines of an established and certified management system.
More information
ENVIRONMENT
We are focused on managing our regular requirements and reducing our environmental impact.
More information